Thank you, from the Foods of the World Forums! |
An Easy and Inexpensive Ice Fishing Rig |
Post Reply |
Author | ||
TasunkaWitko
Admin Group Joined: 25 January 2010 Location: Chinook, MT Status: Offline Points: 9356 |
Post Options
Thanks(1)
Posted: 02 March 2015 at 17:29 |
|
These last couple of years, I've been trying to spend more and more time outdoors with my youngest son (and the older ones too, if they ever want to tag along, which is rarely). Usually we like to go into the Bear's Paw Mountains south of home, and it never fails to be a good time. In the summer, it is easy to find something to do - fishing, hiking, day-camping, cooking over fire and so forth - but in the winter, the choices are much more limited, especially when the temperatures can plunge into the double digits below zero - without the wind chill. Luckily, fishing is still an option! I used to do a little ice-fishing with my dad when I was a kid - we didn't go too often, but enough that I remembered that I had a great time. I remember his old, old hand-driven auger from Sweden, and how it would hang on the wall of the garage most of the year, waiting for the lake to ice over. I also remember, hanging next to the auger, the home-made "tip-up" rigs that he had made long ago, probably when I was just a toddler. Not long ago, I asked him if he would teach my youngest son to make them; it's something that I could have done, but that wasn't the point - the point was that they had a good time making them together, and those of you with both fathers and children know what I mean. People spend a lot of money on ice fishing rigs and in my opinon this simply is not necessary, unless perhaps you are going for 20-pound northern pike. All you really need (per rig) is about 30 inches of 1 x 1 or 1 x 2, a couple of screws and a couple of nails. To make the rig, simply saw the 1 x 1 or 1 x 2 into two not-quite-equal lengths of 14 inches and 16 inches. With two short, strong screws (nails would probably work, too), securely fashion the two pieces into a perpendicular cross, with the 16-inch length on the bottom. To the top 14-inch piece, drive in one nail near one end and another nail farther back past the middle. That's pretty much it - all you need to do now is tie on some fishing line, wrapping it around the two nails; 6 to 10 yards should be enough line for most situations, although you can put on more if you want. For this rig, I tend to use heavier line than would normally be necessary for the fish we are fishing for, but that's just me. To the end of the line, attach either a snap swivel or your terminal tackle. What you end up with is something like this: Sorry for the low cell-phone-quality of the photo, but it's all I had at the time.... In any case, repeat as often as you need to until you have as many rigs as you want, then head yourself out to your favourite fishing hole: If you're lucky like I am, you will be able to have good fishing and stunning scenery at the same time: Power augers are a little out of our budget, so we have a hand-driven auger - a newer version of the one that my dad has, but still from Sweden. It works really well, but can take a good amount of time to make a hole, depending on the thickness of the ice. My son and I brought it with us, but luckily we found some holes that someone else had already made earlier in the day: Now, all you need to do is get yourself down on the ice and set up your rigs: To set your rig, simply unwind the line from the nails as you drop it - with sinker, hook, bait etc. - into the hole, with the nail on the end pointing toward the hole: The picture above is just for demonstration purposes, you actually want the rig closer to the hole, or even just barely hanging over the edge of the hole: I should have taken a picture with the end hanging over, but didn't think of it at the time - maybe next time! In any case, the idea should be pretty clear: since the line is coming off the piece of 1 x 1 (or 2) that is on top of the crosspiece, it will visibly move if a fish is nibbling on the bait. If a fish actually takes the bait and runs with it, the rig will be pulled into the hole, where the longer crosspiece will prevent it from going into the hole. Of course, the piece with the line on it will be pulled down, causing the rig to "tip up." (I should have taken a picture of this to demonstrate, but you certainly get the idea). These photos were taken about two weeks ago, and this was the first time I'd been ice fishing in over 25 years, except for a couple of times tagging along on school tips for the kids. It was a perfect day for it - not too cold, with no wind and some good ice. We didn't catch anything, but had one heck of a good time. This past weekend, we had the chance to go to the same lake on both Saturday and Sunday; I didn't get any pictures, but we spent about an hour-and-a-half on the ice each day. Saturday, we had to dig through about a foot-and-a-half of ice, but it was worth it, We got several nibbles and bites as we learned (or in my case re-learned) the art of fishing with the rigs, and ended up catching five rainbow trout. Continuing our practice of keeping only the ones that "swallow the hook," we released three of them, taking two home. On Sunday, we went out to the same spot and - thanks to using the same iced-over holes as before - only had to drill down about 6 inches before hitting the water. This time, we caught four and brought two home. All-in-all, it was a great weekend - and a very successful trial run of the home-made rigs. I'm not sure where my dad picked up the idea for these rigs - maybe he saw it in a magazine somewhere, or maybe it's just what people were commonly doing in the late 60s and early 70s. What I do know is that it will be teaching a new generation how to go ice fishing without breaking the bank, and with any luck will continue to teach a generation or two after that.
|
||
If you are a visitor and like what you see, please click here and join the discussions in our community!
|
||
Sponsored Links | ||
Percebes
Chef's Apprentice Joined: 10 October 2014 Location: Calgary Status: Offline Points: 449 |
Post Options
Thanks(0)
|
|
Wow- That is amazing scenery. How far is that from Chinook?
Dad taught us to fish with cord draped over willow switches frozen into the slush from chipping holes with a ice chipping bar. We were too poor for store bought lumber and nails:) He would tie a bread bag to the willow so it would move in the wind. You brought back some amazing memories. I have been trying unsuccessfully to make it out ice fishing this year |
||
I am a wine enthusiast. The more wine I drink, the more enthusiastic I become.
|
||
HistoricFoodie
Admin Group Joined: 21 February 2012 Location: Kentucky Status: Offline Points: 4940 |
Post Options
Thanks(0)
|
|
If you're gonna make a bunch of these "poor man's tip ups," instead of finished lumber pick up a bundle of lathing strips. Much more economical, and they serve the same function.
|
||
But we hae meat and we can eat
And sae the Lord be thanket |
||
gonefishin
Master Chef Joined: 20 September 2012 Status: Offline Points: 1778 |
Post Options
Thanks(0)
|
|
You have some of the most breathtaking views that I've seen! What a treat it is for you and your family. That's a great idea for ice fishing...I had seen it quite a while back but had totally forgotten about it.
Not sure if I'm going to hit the ice this year...it's still plenty cold, and good ice is still on the waters...but the cooling lakes are open. I'm thinking I may hit those, from shore, every couple of days. Have fun! |
||
Enjoy The Food!
|
||
gracoman
Chef Joined: 09 August 2013 Status: Offline Points: 885 |
Post Options
Thanks(0)
|
|
X2 I used something similar made by my Grandfather when I was a kid. I guess he was high tec cause his had little red flags that popped up when you got a hit. And a thermos of hot chocolate with a cork stopper for the kids. I'm pretty sure Gramps brought something different along for himself The diehards had miniature wooden shacks on skies they would drag out onto the ice. |
||
drinks
Chef's Apprentice Joined: 19 September 2014 Location: male Status: Offline Points: 372 |
Post Options
Thanks(0)
|
|
Here, ice is what you put in a drink, not fish through.
;>) |
||
TasunkaWitko
Admin Group Joined: 25 January 2010 Location: Chinook, MT Status: Offline Points: 9356 |
Post Options
Thanks(0)
|
|
Hi, guys, and thanks for the comments -
To address a couple of points:
There are back roads, of course, but the basic way to get there from Chinook is to go 20 miles west to Havre, then about 15 miles south to Bear Paw Lake, which is in Beaver Creek Park. This area has been my "zen" since my childhood, and it is probably fair to say that I could die there....
Assuming they can handle the pull of a largish fish, they sound like a great idea. My son wants to make a few of these for friends this fall - we'll give it a try ~ |
||
If you are a visitor and like what you see, please click here and join the discussions in our community!
|
||
Percebes
Chef's Apprentice Joined: 10 October 2014 Location: Calgary Status: Offline Points: 449 |
Post Options
Thanks(0)
|
|
My wife is a prolific quilter and we used to frequently head to a now closed Quilt shop outside of Carter on Hwy 87. We have stopped at the casino on Rocky Boys so we must have been close-but the landscape at Rocky Boys is much, much different:) We are always interested in a rest stop to drop a lawn chair and fire up the portable BBQ- with your permission of course. |
||
I am a wine enthusiast. The more wine I drink, the more enthusiastic I become.
|
||
TasunkaWitko
Admin Group Joined: 25 January 2010 Location: Chinook, MT Status: Offline Points: 9356 |
Post Options
Thanks(0)
|
|
If you would have headed south from that casino, off the reservation, you'd run right into it. Coming down over the viaduct as you enter Havre from the north, turn right at the light, then go two blocks and turn left on 5th Avenue. Follow that out of town - the park begins at 10 miles, and extends for about 20 more. The farther in you go, the prettier it gets!
|
||
If you are a visitor and like what you see, please click here and join the discussions in our community!
|
||
Percebes
Chef's Apprentice Joined: 10 October 2014 Location: Calgary Status: Offline Points: 449 |
Post Options
Thanks(0)
|
|
Awesome. When you come in over the viaduct if you go straight you end up in the grocery store parking lot. IIRC So, I would stop there before picking up 5th Ave. Now where will I find the meat shop? |
||
I am a wine enthusiast. The more wine I drink, the more enthusiastic I become.
|
||
TasunkaWitko
Admin Group Joined: 25 January 2010 Location: Chinook, MT Status: Offline Points: 9356 |
Post Options
Thanks(0)
|
|
The meat shop is on 5th Avenue, toward the end of town on the left. If you drive past Rod's Drive Inn and the high school, you've gone a couple of blocks too far.
The name of the shop is Bear Paw Meats - drop in and say howdy to the crew! http://www.bearpawmeats.com/
|
||
If you are a visitor and like what you see, please click here and join the discussions in our community!
|
||
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |